Ich habe versucht, ein ic2 oled display und einen Rotary Encoder an meinen Arduino Leonardo anzuschließen. Das Display zeigt ein Menü an und mit dem Encoder kann man durch eben jenes Menü navigieren.
Beides alleine funktioniert super, wenn ich aber versuche, beides in einem Sketch zu verwenden, funktioniert keines von beidem mehr so richtig. Wie kann ich beides zusammen laufen lassen? Vielen Dank für die Hilfe im Vorause!
Code:
#include <Arduino.h>
#include <U8g2lib.h>
#include <SPI.h>
#include <Wire.h>
#define rot_A 2
#define rot_B 3
#define rot_Push 4
volatile int buttonState = 0;
int m1p[4] = {25, 3, 24, 24};
int m2p[4] = {53, 3, 24, 24};
int m3p[4] = {80, 3, 24, 24};
int m4p[4] = {25, 28, 24, 24};
int m5p[4] = {53, 28, 24, 24};
int m6p[4] = {80, 28, 24, 24};
int current_mode = 1;
int current_brightness = 50;
int current_color = 0;
int current_band_level = 1;
U8G2_SH1106_128X64_NONAME_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
void setup(void){
pinMode(rot_A,INPUT);
pinMode(LED_BUILTIN, OUTPUT);
attachInterrupt(digitalPinToInterrupt(rot_A), onButtonAPressed, LOW);
u8g2.begin();
}
void onButtonAPressed() {
digitalWrite(LED_BUILTIN, HIGH);
delay(1000);
digitalWrite(LED_BUILTIN, LOW);
delay(1000);
}
void loop(void){
toggleBrightness();
u8g2.firstPage();
do {
drawConstantLayout();
drawModeFrame();
drawBrightnessIndicator();
drawColorSlider();
drawBandSelector();
} while (u8g2.nextPage());
}
// Ab hier ist der Code nurnoch Animations-Zeug, also ich glaube unwichtig für dieses Problem
void drawConstantLayout() {
// Initial Layout Setup
u8g2.drawFrame(0, 0, 128, 64);
// Brightness Seperator
u8g2.drawLine(22, 0, 22, 64);
// Color Seperator
u8g2.drawLine(22, 54, 106, 54);
// Lines Seperator
u8g2.drawLine(106, 0, 106, 64);
// Brightness Indicator
u8g2.drawRFrame(6, 15, 10, 45, 1);
// Lamp Symbol --start
u8g2.drawPixel(7, 8);
u8g2.drawPixel(8, 7);
u8g2.drawPixel(9, 5);
u8g2.drawPixel(9, 4);
u8g2.drawPixel(10, 5);
u8g2.drawPixel(10, 4);
u8g2.drawPixel(10, 3);
u8g2.drawPixel(11, 5);
u8g2.drawPixel(11, 4);
u8g2.drawPixel(11, 3);
u8g2.drawPixel(12, 5);
u8g2.drawPixel(12, 4);
u8g2.drawPixel(13, 5);
u8g2.drawPixel(13, 4);
u8g2.drawPixel(12, 3);
u8g2.drawPixel(11, 8);
u8g2.drawPixel(11, 7);
u8g2.drawPixel(14, 7);
u8g2.drawPixel(15, 8);
// Lamp Symbol --end
// O --begin
u8g2.drawPixel(26, 60);
u8g2.drawPixel(27, 61);
u8g2.drawPixel(28, 61);
u8g2.drawPixel(29, 61);
u8g2.drawPixel(30, 60);
u8g2.drawPixel(30, 59);
u8g2.drawPixel(30, 58);
u8g2.drawPixel(29, 57);
u8g2.drawPixel(28, 57);
u8g2.drawPixel(27, 57);
u8g2.drawPixel(26, 58);
u8g2.drawPixel(26, 59);
// O --end
// Color Slide Line
u8g2.drawLine(33, 60, 98, 60);
u8g2.drawPixel(33, 61);
u8g2.drawPixel(98, 61);
// R --begin
u8g2.drawPixel(104, 61);
u8g2.drawPixel(104, 60);
u8g2.drawPixel(103, 59);
u8g2.drawPixel(102, 59);
u8g2.drawPixel(101, 59);
u8g2.drawPixel(101, 60);
u8g2.drawPixel(101, 61);
u8g2.drawPixel(104, 58);
u8g2.drawPixel(103, 57);
u8g2.drawPixel(102, 57);
u8g2.drawPixel(101, 57);
u8g2.drawPixel(101, 58);
// R --end
// Bands --begin
u8g2.drawFrame(111, 5, 13, 6);
u8g2.drawFrame(111, 13, 13, 6);
u8g2.drawFrame(111, 21, 13, 6);
u8g2.drawFrame(111, 29, 13, 6);
u8g2.drawFrame(111, 37, 13, 6);
u8g2.drawFrame(111, 45, 13, 6);
u8g2.drawFrame(111, 53, 13, 6);
// Bands --end
// Only-Light-Mode Logo --begin
u8g2.drawLine(33, 5, 40, 5);
u8g2.drawLine(32, 6, 32, 7);
u8g2.drawLine(31, 8, 31, 10);
u8g2.drawLine(41, 6, 41, 7);
u8g2.drawLine(42, 8, 42, 10);
u8g2.drawLine(32, 11, 41, 11);
u8g2.drawLine(30, 11, 29, 12);
u8g2.drawLine(29, 13, 31, 15);
u8g2.drawPixel(32, 15);
u8g2.drawLine(43, 11, 44, 12);
u8g2.drawLine(44, 13, 42, 15);
u8g2.drawPixel(41, 15);
u8g2.drawLine(33, 16, 40, 16);
u8g2.drawLine(31, 17, 28, 24);
u8g2.drawLine(35, 18, 34, 24);
u8g2.drawLine(38, 18, 39, 24);
u8g2.drawLine(42, 17, 45, 24);
// Only-Light-Mode Logo --end
// Simple Visualizer Logo --begin
u8g2.drawLine(55, 24, 63, 24);
u8g2.drawLine(55, 22, 55, 14);
u8g2.drawLine(57, 22, 57, 19);
u8g2.drawPixel(59, 22);
u8g2.drawLine(61, 22, 61, 21);
u8g2.drawLine(63, 22, 63, 20);
u8g2.drawLine(59, 14, 68, 14);
u8g2.drawLine(66, 12, 68, 14);
u8g2.drawLine(66, 16, 68, 14);
u8g2.drawFrame(71, 7, 3, 18);
u8g2.drawLine(72, 14, 72, 23);
// Simple Viualizer Logo --end
// Ray Visualizer Logo -- begin
u8g2.drawLine(82, 24, 90, 24);
u8g2.drawLine(82, 22, 82, 14);
u8g2.drawLine(84, 22, 84, 19);
u8g2.drawPixel(86, 22);
u8g2.drawLine(88, 22, 88, 21);
u8g2.drawLine(90, 22, 90, 20);
u8g2.drawLine(86, 14, 95, 14);
u8g2.drawLine(93, 12, 95, 14);
u8g2.drawLine(93, 16, 95, 14);
u8g2.drawPixel(100, 5);
u8g2.drawRFrame(99, 6, 3, 5, 1);
u8g2.drawPixel(100, 11);
u8g2.drawRBox(99, 12, 3, 5, 1);
u8g2.drawPixel(100, 17);
u8g2.drawRFrame(99, 18, 3, 5, 1);
u8g2.drawPixel(100, 23);
// Mode selector test
}
/// Just Animation Stuff
void toggleMode(){
if (current_mode != 6){
current_mode = current_mode + 1;
} else {
current_mode = 1;
}
}
void toggleBrightness(){
if(current_brightness != 100){
current_brightness = current_brightness + 10;
} else {
current_brightness = 0;
}
}
void toggleColor(){
if(current_color != 100){
current_color = current_color + 5;
} else {
current_color = 0;
}
}
void toggleBandLevel() {
if(current_band_level != 13) {
current_band_level = current_band_level + 1;
} else {
current_band_level = 1;
}
}
// End of Animation Stuff
void drawModeFrame(){
switch (current_mode){
case 1:
u8g2.drawFrame(m1p[0], m1p[1], m1p[2], m1p[3]);
break;
case 2:
u8g2.drawFrame(m2p[0], m2p[1], m2p[2], m2p[3]);
break;
case 3:
u8g2.drawFrame(m3p[0], m3p[1], m3p[2], m3p[3]);
break;
case 4:
u8g2.drawFrame(m4p[0], m4p[1], m4p[2], m4p[3]);
break;
case 5:
u8g2.drawFrame(m5p[0], m5p[1], m5p[2], m5p[3]);
break;
case 6:
u8g2.drawFrame(m6p[0], m6p[1], m6p[2], m6p[3]);
break;
default:
u8g2.drawFrame(30, 30, 29, 29);
break;
}
}
void drawBrightnessIndicator() {
// Max heights: 15 - 60
int true_height = 59 - (current_brightness * 0.44);
u8g2.drawLine(6, true_height, 15, true_height);
}
void drawColorSlider() {
// Max widths: 33 - 98
int true_width = 33 + current_color * 0.65;
u8g2.drawLine(true_width, 58, true_width, 62);
}
void drawBandSelector() {
if((current_band_level / 7.0) > 1) {
u8g2.drawBox(120, 7 + ((current_band_level - 8) * 8), 2, 2);
u8g2.drawBox(120, 15 + (( current_band_level - 8) * 8), 2, 2);
} else {
u8g2.drawBox(120, 7 + ((current_band_level - 1) * 8), 2, 2);
}
}
Rotary Encoder und I2C Display gleichzeitig verwenden
