INFO: Dieses Forum nutzt Cookies...
Cookies sind für den Betrieb des Forums unverzichtbar. Mit der Nutzung des Forums erklärst Du dich damit einverstanden, dass wir Cookies verwenden.

Es wird in jedem Fall ein Cookie gesetzt um diesen Hinweis nicht mehr zu erhalten. Desweiteren setzen wir Google Adsense und Google Analytics ein.

Antwort schreiben 
 
Themabewertung:
  • 0 Bewertungen - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
Problem beim Kompilieren Mega2560 und Dallastemp
24.09.2018, 01:42 (Dieser Beitrag wurde zuletzt bearbeitet: 24.09.2018 02:37 von sepp01.)
Beitrag #1
Problem beim Kompilieren Mega2560 und Dallastemp
Hat sich erstmal erledigt.
habe die IDE neu installiert und das erste Kompilieren mit diesem Beispiel-Sketch hat funktioniert

Grüße Sepp

Hallo,

bin gerade dabei meine Sensoren einzubinden und bekomme bei einem Beispiel-Sketch der Dallas-Bibliothek einen Fehler das er mit meinem Mega2560 wohl nicht zurecht kommt.
Anfangs hatte ich noch andere Bibliotheken (wohl veraltete) im Ordner die er auch angemeckert hat, diese habe ich gelöscht, IDE neugestartet , hilft aber nix.

Komisch, ich habe an dem Beispiel-Sketch nichts geändert

Nachfolgen der Sketch und die ausführliche Fehlermeldung

Grüße Sepp

ps. ich wollte diesen Sketch testen da ich mehrere Sensoren im One-Wire Bus habe, Die Hardwareadressen habe ich schon ausgelesen damit ich sie dann später gezielt abfragen kann.
Da er in meinem Hauptprogramm auch diesen fehler beim kompilieren brachte, versuchte ich erstmal Beispielsketches... die anderen Beispiele der bibliothek gehen, zumindest die ersten, einfachen.

edit:
das Board ist ein Saintsmart Mega2560... machte bis jetzt eigentlich keine Probleme

Hier der Sketch
Code:
// Include the libraries we need
#include <OneWire.h>
#include <DallasTemperature.h>

// Data wire is plugged into port 2 on the Arduino
#define ONE_WIRE_BUS 2
#define TEMPERATURE_PRECISION 9

// Setup a oneWire instance to communicate with any OneWire devices (not just Maxim/Dallas temperature ICs)
OneWire oneWire(ONE_WIRE_BUS);

// Pass our oneWire reference to Dallas Temperature.
DallasTemperature sensors(&oneWire);

// arrays to hold device addresses
DeviceAddress insideThermometer, outsideThermometer;

// Assign address manually. The addresses below will beed to be changed
// to valid device addresses on your bus. Device address can be retrieved
// by using either oneWire.search(deviceAddress) or individually via
// sensors.getAddress(deviceAddress, index)
// DeviceAddress insideThermometer = { 0x28, 0x1D, 0x39, 0x31, 0x2, 0x0, 0x0, 0xF0 };
// DeviceAddress outsideThermometer   = { 0x28, 0x3F, 0x1C, 0x31, 0x2, 0x0, 0x0, 0x2 };

void setup(void)
{
  // start serial port
  Serial.begin(9600);
  Serial.println("Dallas Temperature IC Control Library Demo");

  // Start up the library
  sensors.begin();

  // locate devices on the bus
  Serial.print("Locating devices...");
  Serial.print("Found ");
  Serial.print(sensors.getDeviceCount(), DEC);
  Serial.println(" devices.");

  // report parasite power requirements
  Serial.print("Parasite power is: ");
  if (sensors.isParasitePowerMode()) Serial.println("ON");
  else Serial.println("OFF");

  // Search for devices on the bus and assign based on an index. Ideally,
  // you would do this to initially discover addresses on the bus and then
  // use those addresses and manually assign them (see above) once you know
  // the devices on your bus (and assuming they don't change).
  //
  // method 1: by index
  if (!sensors.getAddress(insideThermometer, 0)) Serial.println("Unable to find address for Device 0");
  if (!sensors.getAddress(outsideThermometer, 1)) Serial.println("Unable to find address for Device 1");

  // method 2: search()
  // search() looks for the next device. Returns 1 if a new address has been
  // returned. A zero might mean that the bus is shorted, there are no devices,
  // or you have already retrieved all of them. It might be a good idea to
  // check the CRC to make sure you didn't get garbage. The order is
  // deterministic. You will always get the same devices in the same order
  //
  // Must be called before search()
  //oneWire.reset_search();
  // assigns the first address found to insideThermometer
  //if (!oneWire.search(insideThermometer)) Serial.println("Unable to find address for insideThermometer");
  // assigns the seconds address found to outsideThermometer
  //if (!oneWire.search(outsideThermometer)) Serial.println("Unable to find address for outsideThermometer");

  // show the addresses we found on the bus
  Serial.print("Device 0 Address: ");
  printAddress(insideThermometer);
  Serial.println();

  Serial.print("Device 1 Address: ");
  printAddress(outsideThermometer);
  Serial.println();

  // set the resolution to 9 bit per device
  sensors.setResolution(insideThermometer, TEMPERATURE_PRECISION);
  sensors.setResolution(outsideThermometer, TEMPERATURE_PRECISION);

  Serial.print("Device 0 Resolution: ");
  Serial.print(sensors.getResolution(insideThermometer), DEC);
  Serial.println();

  Serial.print("Device 1 Resolution: ");
  Serial.print(sensors.getResolution(outsideThermometer), DEC);
  Serial.println();
}

// function to print a device address
void printAddress(DeviceAddress deviceAddress)
{
  for (uint8_t i = 0; i < 8; i++)
  {
    // zero pad the address if necessary
    if (deviceAddress[i] < 16) Serial.print("0");
    Serial.print(deviceAddress[i], HEX);
  }
}

// function to print the temperature for a device
void printTemperature(DeviceAddress deviceAddress)
{
  float tempC = sensors.getTempC(deviceAddress);
  Serial.print("Temp C: ");
  Serial.print(tempC);
  Serial.print(" Temp F: ");
  Serial.print(DallasTemperature::toFahrenheit(tempC));
}

// function to print a device's resolution
void printResolution(DeviceAddress deviceAddress)
{
  Serial.print("Resolution: ");
  Serial.print(sensors.getResolution(deviceAddress));
  Serial.println();
}

// main function to print information about a device
void printData(DeviceAddress deviceAddress)
{
  Serial.print("Device Address: ");
  printAddress(deviceAddress);
  Serial.print(" ");
  printTemperature(deviceAddress);
  Serial.println();
}

/*
   Main function, calls the temperatures in a loop.
*/
void loop(void)
{
  // call sensors.requestTemperatures() to issue a global temperature
  // request to all devices on the bus
  Serial.print("Requesting temperatures...");
  sensors.requestTemperatures();
  Serial.println("DONE");

  // print the device information
  printData(insideThermometer);
  printData(outsideThermometer);
}

hier die Felermeldung:
Code:
Arduino: 1.8.5 (Windows 7), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"

D:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware D:\Program Files (x86)\Arduino\hardware -hardware C:\Users\achim\AppData\Local\Arduino15\packages -tools D:\Program Files (x86)\Arduino\tools-builder -tools D:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\achim\AppData\Local\Arduino15\packages -built-in-libraries D:\Program Files (x86)\Arduino\libraries -libraries C:\Users\achim\Documents\Arduino\libraries -fqbn=arduino:avr:mega:cpu=atmega2560 -vid-pid=0X2341_0X0042 -ide-version=10805 -build-path C:\Users\achim\AppData\Local\Temp\arduino_build_511364 -warnings=all -build-cache C:\Users\achim\AppData\Local\Temp\arduino_cache_79881 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2 -prefs=runtime.tools.avrdude.path=C:\Users\achim\AppData\Local\Arduino15\packages​\arduino\tools\avrdude\6.3.0-arduino9 -prefs=runtime.tools.arduinoOTA.path=C:\Users\achim\AppData\Local\Arduino15\packa​ges\arduino\tools\arduinoOTA\1.1.1 -verbose C:\Users\achim\Documents\Arduino\libraries\DallasTemperature\examples\Multiple\M​ultiple.pde
D:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware D:\Program Files (x86)\Arduino\hardware -hardware C:\Users\achim\AppData\Local\Arduino15\packages -tools D:\Program Files (x86)\Arduino\tools-builder -tools D:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\achim\AppData\Local\Arduino15\packages -built-in-libraries D:\Program Files (x86)\Arduino\libraries -libraries C:\Users\achim\Documents\Arduino\libraries -fqbn=arduino:avr:mega:cpu=atmega2560 -vid-pid=0X2341_0X0042 -ide-version=10805 -build-path C:\Users\achim\AppData\Local\Temp\arduino_build_511364 -warnings=all -build-cache C:\Users\achim\AppData\Local\Temp\arduino_cache_79881 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2 -prefs=runtime.tools.avrdude.path=C:\Users\achim\AppData\Local\Arduino15\packages​\arduino\tools\avrdude\6.3.0-arduino9 -prefs=runtime.tools.arduinoOTA.path=C:\Users\achim\AppData\Local\Arduino15\packa​ges\arduino\tools\arduinoOTA\1.1.1 -verbose C:\Users\achim\Documents\Arduino\libraries\DallasTemperature\examples\Multiple\M​ultiple.pde
Using board 'mega' from platform in folder: C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21
Using core 'arduino' from platform in folder: C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21
Detecting libraries used...
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\sketch\Multiple.pde.cpp" -o "nul"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "-IC:\Users\achim\Documents\Arduino\libraries\OneWire" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\sketch\Multiple.pde.cpp" -o "nul"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "-IC:\Users\achim\Documents\Arduino\libraries\OneWire" "-IC:\Users\achim\Documents\Arduino\libraries\DallasTemperature" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\sketch\Multiple.pde.cpp" -o "nul"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "-IC:\Users\achim\Documents\Arduino\libraries\OneWire" "-IC:\Users\achim\Documents\Arduino\libraries\DallasTemperature" "C:\Users\achim\Documents\Arduino\libraries\OneWire\OneWire.cpp" -o "nul"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "-IC:\Users\achim\Documents\Arduino\libraries\OneWire" "-IC:\Users\achim\Documents\Arduino\libraries\DallasTemperature" "C:\Users\achim\Documents\Arduino\libraries\DallasTemperature\DallasTemperature.c​pp" -o "nul"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "-IC:\Users\achim\Documents\Arduino\libraries\OneWire" "-IC:\Users\achim\Documents\Arduino\libraries\DallasTemperature" "C:\Users\achim\Documents\Arduino\libraries\DallasTemperature\OneWire.cpp" -o "nul"
Generating function prototypes...
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics  -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "-IC:\Users\achim\Documents\Arduino\libraries\OneWire" "-IC:\Users\achim\Documents\Arduino\libraries\DallasTemperature" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\sketch\Multiple.pde.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\preproc\ctags_target_for_​gcc_minus_e.cpp"
"D:\Program Files (x86)\Arduino\tools-builder\ctags\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\preproc\ctags_target_for_​gcc_minus_e.cpp"
Sketch wird kompiliert...
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "-IC:\Users\achim\Documents\Arduino\libraries\OneWire" "-IC:\Users\achim\Documents\Arduino\libraries\DallasTemperature" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\sketch\Multiple.pde.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\sketch\Multiple.pde.cpp.o​"
Compiling libraries...
Compiling library "OneWire"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "-IC:\Users\achim\Documents\Arduino\libraries\OneWire" "-IC:\Users\achim\Documents\Arduino\libraries\DallasTemperature" "C:\Users\achim\Documents\Arduino\libraries\OneWire\OneWire.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o"
Compiling library "DallasTemperature"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "-IC:\Users\achim\Documents\Arduino\libraries\OneWire" "-IC:\Users\achim\Documents\Arduino\libraries\DallasTemperature" "C:\Users\achim\Documents\Arduino\libraries\DallasTemperature\DallasTemperature.c​pp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\DallasTemperature.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "-IC:\Users\achim\Documents\Arduino\libraries\OneWire" "-IC:\Users\achim\Documents\Arduino\libraries\DallasTemperature" "C:\Users\achim\Documents\Arduino\libraries\DallasTemperature\OneWire.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o"
Compiling core...
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc" -c -g -x assembler-with-cpp -flto -MMD -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\wiring_pulse.S" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\wiring_pulse.S.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc" -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\WInterrupts.c" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\WInterrupts.c.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc" -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\hooks.c" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\hooks.c.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc" -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\wiring.c" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\wiring.c.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc" -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\wiring_analog.c" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\wiring_analog.c.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc" -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\wiring_digital.c" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\wiring_digital.c.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc" -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\wiring_pulse.c" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\wiring_pulse.c.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc" -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\wiring_shift.c" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\wiring_shift.c.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\CDC.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\CDC.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\HardwareSerial.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\HardwareSerial.cpp.o​"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\HardwareSerial0.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\HardwareSerial0.cpp.​o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\HardwareSerial1.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\HardwareSerial1.cpp.​o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\HardwareSerial2.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\HardwareSerial2.cpp.​o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\HardwareSerial3.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\HardwareSerial3.cpp.​o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\IPAddress.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\IPAddress.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\PluggableUSB.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\PluggableUSB.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\Print.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\Print.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\Stream.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\Stream.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\Tone.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\Tone.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\USBCore.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\USBCore.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\WMath.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\WMath.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\WString.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\WString.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\abi.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\abi.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\main.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\main.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10805 -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR   "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\cor​es\arduino" "-IC:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\var​iants\mega" "C:\Users\achim\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.21\core​s\arduino\new.cpp" -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\new.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\wiring_pulse.S.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\WInterrupts.c.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\hooks.c.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\wiring.c.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\wiring_analog.c.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\wiring_digital.c.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\wiring_pulse.c.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\wiring_shift.c.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\CDC.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\HardwareSerial.cpp.o​"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\HardwareSerial0.cpp.​o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\HardwareSerial1.cpp.​o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\HardwareSerial2.cpp.​o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\HardwareSerial3.cpp.​o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\IPAddress.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\PluggableUSB.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\Print.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\Stream.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\Tone.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\USBCore.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\WMath.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\WString.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\abi.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\main.cpp.o"
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc-ar" rcs  "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\core.a" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\core\new.cpp.o"
Archiving built core (caching) in: C:\Users\achim\AppData\Local\Temp\arduino_cache_79881\core\core_arduino_avr_mega​_cpu_atmega2560_fa72b0f919b442623963d9a601cb582e.a
Linking everything together...
"C:\Users\achim\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\4.9.2-atmel3.5.4-arduino2/bin/avr-gcc" -Wall -Wextra -Os -g -flto -fuse-linker-plugin -Wl,--gc-sections,--relax -mmcu=atmega2560  -o "C:\Users\achim\AppData\Local\Temp\arduino_build_511364/Multiple.pde.elf" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\sketch\Multiple.pde.cpp.o​" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\DallasTemperature.cpp.o" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o" "C:\Users\achim\AppData\Local\Temp\arduino_build_511364/core\core.a" "-LC:\Users\achim\AppData\Local\Temp\arduino_build_511364" -lm
C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::write(unsigned char, unsigned char)'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o (symbol from plugin):(.text+0x0): first defined here

c:/users/achim/appdata/local/arduino15/packages/arduino/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/../lib/gcc/avr/4.9.2/../../../../avr/bin/ld.exe: Disabling relaxation: it will not work with multiple definitions

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::write_bytes(unsigned char const*, unsigned int, bool)'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o (symbol from plugin):(.text+0x0): first defined here

Mehrere Bibliotheken wurden für "OneWire.h" gefunden
Benutzt: C:\Users\achim\Documents\Arduino\libraries\OneWire
C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

Nicht benutzt: C:\Users\achim\Documents\Arduino\libraries\DallasTemperature
(.text+0x0): multiple definition of `OneWire::reset()'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o (symbol from plugin):(.text+0x0): first defined here

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::write_bit(unsigned char)'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o (symbol from plugin):(.text+0x0): first defined here

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::read_bit()'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o (symbol from plugin):(.text+0x0): first defined here

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::read()'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o (symbol from plugin):(.text+0x0): first defined here

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::read_bytes(unsigned char*, unsigned int)'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o (symbol from plugin):(.text+0x0): first defined here

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::select(unsigned char const*)'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o (symbol from plugin):(.text+0x0): first defined here

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::skip()'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o (symbol from plugin):(.text+0x0): first defined here

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::depower()'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o (symbol from plugin):(.text+0x0): first defined here

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::reset_search()'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o (symbol from plugin):(.text+0x0): first defined here

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::OneWire(unsigned char)'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o (symbol from plugin):(.text+0x0): first defined here

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::OneWire(unsigned char)'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o (symbol from plugin):(.text+0x0): first defined here

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::target_search(unsigned char)'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o (symbol from plugin):(.text+0x0): first defined here

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::search(unsigned char*, bool)'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o (symbol from plugin):(.text+0x0): first defined here

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::crc8(unsigned char const*, unsigned char)'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o (symbol from plugin):(.text+0x0): first defined here

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::crc16(unsigned char const*, unsigned int, unsigned int)'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o (symbol from plugin):(.text+0x0): first defined here

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::check_crc16(unsigned char const*, unsigned int, unsigned char const*, unsigned int)'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​.cpp.o (symbol from plugin):(.text+0x0): first defined here

collect2.exe: error: ld returned 1 exit status

Bibliothek OneWire in Version 2.3.3 im Ordner: C:\Users\achim\Documents\Arduino\libraries\OneWire  wird verwendet
Bibliothek DallasTemperature in Version 3.7.9 im Ordner: C:\Users\achim\Documents\Arduino\libraries\DallasTemperature  wird verwendet
exit status 1
[b]Fehler beim Kompilieren für das Board Arduino/Genuino Mega or Mega 2560.[/b]
Alle Beiträge dieses Benutzers finden
Diese Nachricht in einer Antwort zitieren
24.09.2018, 10:07
Beitrag #2
RE: Problem beim Kompilieren Mega2560 und Dallastemp
Moin,


ich habe den bei mir grad mal durch gejagt...
Kompiliert ohne meckern.

In der Warnung wird von:
Zitat:Mehrere Bibliotheken wurden für "OneWire.h" gefunden
Benutzt: C:\Users\achim\Documents\Arduino\libraries\OneWire
C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

Nicht benutzt: C:\Users\achim\Documents\Arduino\libraries\DallasTemperature
(.text+0x0): multiple definition of `OneWire::reset()'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​​.cpp.o (symbol from plugin)Sad.text+0x0): first defined here

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::write_bit(unsigned char)'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​​.cpp.o (symbol from plugin)Sad.text+0x0): first defined here

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::read_bit()'

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\OneWire\OneWire​​.cpp.o (symbol from plugin)Sad.text+0x0): first defined here

C:\Users\achim\AppData\Local\Temp\arduino_build_511364\libraries\DallasTemperatu​​re\OneWire.cpp.o (symbol from plugin): In function `OneWire::write(unsigned char, unsigned char)':

(.text+0x0): multiple definition of `OneWire::read()'

etc gesprochen, ich nehme an du hast mehrere Bibliotheken, das beisst sich.
Da ich nichts weiter als die Grundversion hier habe, sollte eine neu installation oder nebeninstallation helfen können.

Das ist nur eine Mutmaßung aber wenn du s.o. mehrere Bibs hast dann wäre es naheliegend nur eine zu verwenden Wink


Gruß

Nicht denken,...
...nachdenken... Rolleyes

Smarter - LiveData - KLAMM.de
Alle Beiträge dieses Benutzers finden
Diese Nachricht in einer Antwort zitieren
24.09.2018, 11:33
Beitrag #3
RE: Problem beim Kompilieren Mega2560 und Dallastemp
(24.09.2018 10:07)Hilgi schrieb:  Moin,


ich habe den bei mir grad mal durch gejagt...
Kompiliert ohne meckern.

Das ist nur eine Mutmaßung aber wenn du s.o. mehrere Bibs hast dann wäre es naheliegend nur eine zu verwenden Wink


Gruß

Danke,

ja nach dem Lesen der Fehlermeldungen hatte ich so eine Vermutung das wohl alte Bibliotheken von einer früheren Installation schuld sein könnten.
hatte dann die IDE über den WIN-Systemmanger deinstalliert und zuvor Pfade die die IDE angemeckert hat auch nochmals gelöscht ... ersucht also alles zu bereinigen, dann IDE neu installiert und den Board-Manager aktualisiert... seit dem geht es 1a

Grüße Sepp
Alle Beiträge dieses Benutzers finden
Diese Nachricht in einer Antwort zitieren
Antwort schreiben 


Möglicherweise verwandte Themen...
Thema: Verfasser Antworten: Ansichten: Letzter Beitrag
  Fehler beim Hochladen auf Atmega 328 delay 17 778 30.07.2019 12:33
Letzter Beitrag: Tommy56
  PZS Problem mit Ausgang schalten Flötzinger 0 454 28.06.2019 15:53
Letzter Beitrag: Flötzinger
  DCF77 Fehler beim Kompilieren Xwill 5 802 11.06.2019 21:47
Letzter Beitrag: Tommy56
  Hilfe benötigt beim Verknüpfen von Klassen Batucada 7 786 02.03.2019 23:47
Letzter Beitrag: georg01
  Problem mit UniversalTelegramBot edi_ying 8 764 09.02.2019 15:11
Letzter Beitrag: Tommy56
Question (Denk)Problem mit char array[] ? ManfredH 3 511 05.02.2019 12:01
Letzter Beitrag: ManfredH
  USB Problem mit Linux HeikeF 5 682 03.02.2019 17:04
Letzter Beitrag: Tommy56
  Drehgeber wie Iduino SE055 - Software- oder Hardware-Problem? Arduinero 12 894 24.01.2019 13:55
Letzter Beitrag: Bitklopfer
  [Anfänger] Char Array Problem fp.blues2013 1 444 07.01.2019 13:06
Letzter Beitrag: Tommy56
  Arduino IDE Fehler beim öffnen des Seriallen Monitors mgm099 6 840 28.12.2018 12:42
Letzter Beitrag: mgm099

Gehe zu:


Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste